Global Leaders in Corrosion-Resistant Equipment of Acid Plants.

“In 1987, Galiakotwala Engineering Company (GEC) provided our first Shell and Tube Type Heat Exchanger with the assurance of an advanced, efficient design and manufactured with a low-corrosion alloy that would extend its lifespan. Even after 30+ years of trouble-free operation, the Heat Exchangers are still functioning effectively. We are pleased to report that GEC adhered to their commitments.”

Vice President Technology
Dharamsi Morarji, Roha

“We are using your Vane Separators for the last 15 years and have never faced any issues in the performance or life of the equipment. We are thankful to the Galiakotwala team for designing the special type Vane Separators according to our requirement that continues to ensure our process operates.”

Sr. Manager (Mechanical),
TATA Steel

“We were continuously facing excess mist generation and moisture carryover problems in FAT and DT with the conventional distributors. Galiakotwala Engineering Company (GEC) replaced conventional distributors with Alloy Distributors in 2004. Since then, there is no change in the thickness and deformation of hole sizes of the branch pipes of the distributor. We appreciate the quality of work and the materials used by GEC even after 18 years of operation.”

Deputy General Manager (Mechanical),
Paradeep Phosphates Limited

“We wanted to replace our old Brick-Lined Acid Towers with a newer technology due to difficulty in location and repair of leaks in these Acid Towers. GEC gave a solution of a complete Alloy Tower 7500mm in diameter including all internals such as Distributor, Mist Eliminators, Packing and Support, etc. We are happy to note we have observed no corrosion in last 7 years and achieved 99.99% absorption efficiency.”

JSC Apatit,
Russia

“Galiakotwala Engineering Company has provided us with the best solution in form of Alloy Piping to get rid of continued issues of leakage in conventional Sulphuric Acid Piping. After installation of the Alloy Piping, we observed zero leakage and significant cost savings due to reduced downtime. Since then we have changed most of our Acid Piping in both Sulphuric Acid Plants at Haldia with their low corrosion alloy.”

General Manager (Engineering),
Tata Chemicals Limited, Haldia

“We were facing mist carryover problems in the Drying Tower for a long time. We discussed the problem with the Galiakotwala Technical Services (GTS) Technical team.They studied the issue and gave the solution of an advanced Demister Pad of SX Wire Mesh for Drying Tower and solved this prolonged problem permanently.”

General Manager (Auxiliary),
Century Rayon

“I am pleased to report that since installing the GEC BMW Type Candle Filter in our Interpass Absorption Tower (IPAT) at our Sulphuric Acid Plant in 2019, it has performed exceptionally well. We have not observed any acid condensate at the outlet of the IPAT, indicating the filter is effectively removing any impurities.”

Manager SAP Plant
Birla Copper